Dynamic Handset V1
The Dynamic V1 Handset features a high-quality receiver and Dynamic microphone.
The Dynamic V1 Handset features a high-quality receiver and Dynamic microphone. The handset is constructed of durable ABS plastic combined with a high strength stainless cord and steel lanyard. The Dynamic V1 handset includes a low-impedence dynamic microphone. For applications which require a microphone with higher impedence, please see the Dynamic V2 handset. See technical specifications of each Dynamic handset for more info.
Each handset consist of the following elements:
- Handset type: SD-45150H20 Standard Receiver and DT-05 Dynamic Type 1 Transmitter.
- Handset handle and cap material: ABS plastic
- Wiring: Four 24 gauge Teflon insulated wires (2 for receiver, 2 for transmitter) with single modular plug (Optional 4 spade conductors)
Armored Cord Assembly.:
- 304 Stainless Steel, Interlock style. Inside Diameter, 0.250", 6.350mm. Outside Diameter, 0.329", 8.357mm. Linear Pull Test Load, 1000 lbs., 454 kg
- Includes steel lanyard which is anchored to handset handle. Steel lanyard has a pull test load of approx. 1000 lbs, 454 kgs.
- Other Components: lanyard block retainer; anti-rotation wedge; transmitter holder; blue rubber grommet to seal handset/cord connection
SD-45150H20 Standard Receiver:
- DC Resistance at 20 degrees C : 145 ± 15 ohm
- Frequency Response Range: 300-3400 Hz
- Sensitivity: 100 ± 2 dB at 60mv
- Impedance: 150 ± 30 ohm at 1 KHz
DT-05 Dynamic Type 1 Transmitter:
- Type : Dynamic Type Transmitter
- Response Range : -66 ± 3.5dBV(300-3300Hz)
- Frequency Response : 1KHz: -66 ± 3.5 dbV
- Impedance : 150 ± 30 ohm
- Electrostatic Discharge : Breakdown Volt. 15KV.Min
- Screw terminal
Custom colors, cord lengths, microphones and wire terminal/plugs are available depending on details and volume. Call 1-800-884-4835 or fill out the contact us form to inquire about custom handsets or volume quotes.Â
Handset caps are sealed with high-strength epoxy adhesive prior to shipping, unless otherwise requested.
Master Case Qty: 30 pcs
 4-pin modular connectors are supplied with most handsets at no additional cost, while supplies last. Certain handset variants which require modular connectors may require an upcharge.
Â
- TypeBlack 32" Spade, Black 14" Spade, Black 18" Spade, Black 24" Spade, Black 52" Spade, Black 96" Spade, Black 32" Modular, Black 14" Modular, Black 18" Modular, Black 24" Modular, Black 52" Modular, Black 96" Modular
- Extra fields
- Warranty90 Days
- Lead TimeUsually ships 1-3 business days
- ManufacturerG-Tel
- Product TypeParts
- Google Product CategoryElectronics > Communications > Telephony > Telephone Accessories
- MPNSKU_16875
- Manufacturers
- ManufacturerG-TEL Enterprises, Inc.